Applying Screen protectors properly without annoying bubbles or dusts for phones and tablets can be the most frustrating job.

In this article you’ll get some useful tips on how to put on a screen protector directly to avoid any bubbles or trapped dirts.

This methoud apply to different mertials’ screen protecotr for phone and tablets like tempered glass, plastic, PET film, liquid film, etc.

Step 1: How to remove the old phone or tablet screen protector?

broken cracked iphone ipad glass screen protector
How to remove broken cracked iphone ipad glass screen protector

1, Prepare all the relevant tools and materials.

  • The phone,
  • Alcohol pad,
  • Dust absorber,
  • Cleaning cloth,
  • New screen protector,
  • Squeeze card.

Prepare Installation Tools
Prepare Installation Tools

2, First of all, we should remove the old screen protector of our phone. Pick up one corner of the screen protector with a sharp object like credit card. I choose a knife. Everyone chooses according to the tools at hand.

 

credit card
credit card

 

Pay attention to pull up the screen protector and do not scratch the phone screen.

3, Then use the same method to pry the other three corners of the screen protector, and use a little more force when smashing, so that the four sides of the screen protector can be pulled up.

4, After the four corners are picked up, grab the lower corner and pull up.
Then the whole screen protector will start to loosen, and then pull up the four corners until it is removed.

The task of removing the old screen protector is now completed.

If you want to read more details on how to remove phone or tablet screen protector, high recommend to see this post

How to remove iphone ipad glass screen protector

Step 2: How to Clean the phone screen?

https://youtu.be/yMQAH6QyBH0

Clean up screen with alcohol pad
  • Clean up the screen with alcohol pad. Make sure there is no dust and stain.

wipe dry water stain with the cleaning cloth
  • Then wipe dry the water stain with the cleaning cloth.

take out the dust absorber
  • Then take out the dust absorber and pull it out from the arrow to open it.  The dust absorber can absorb the dust on the screen.

The dust absorber absorb the dust on the screen
  • Hold the arrow of the dust absorber, stick on and take off from the screen, then change the different positions and repeat this action for several times until the screen looks clean and dust-free.

  • Then observe the screen, repeat the use of cleaning cloth and dust absorber for screen cleaning, ensure that there is no dust and stain on the screen and it looks clean like a mirror, then the cleaning work is completed.

ensure the screen looks clean and dust free
ensure the screen looks clean and dust free

Step 3: How to install the new screen protector perfectly without alignment tool?

Warm Tips: Before the installation,please make sure the doors and windows are closed.Try to keep the invironment clean and avoid the occurrence of dust or lint.

Take out the new screen protector
Take out the new screen protector

1, Take out the new screen protector, wipe it with a cleaning cloth, make sure there is no dust on the outside, then grab the top of the backboard and then tear off the screen protector.

grab the top of the backboard
grab the top of the backboard

2, Put the upper part on the phone screen, first align the upper part of the screen protectoe with the upper part of phone screen, and compact it slightly.

Put the upper part on the phone screen
Put the upper part on the phone screen

3, After aligning the upper part, slowly adjust the position of the whole screen protector appropriately to ensure the position is correct, and then place the lower half on the screen.

Adjust the position of the whole screen protector
Adjust the position of the whole screen protector

4, At this point, the screen protector will automatically stick to the screen and slowly expand to the surrounding area. Take out the squeeze card, press the edge from the top to the bottom, and drive the bubbles away.

Take out the squeeze card, press the edge from the top to the bottom
Take out the squeeze card, press the edge from the top to the bottom

If there is air bubbles or dust in the middle area, peel up the corner, stick the dust out with dust absorber and then use the squeeze card to drive out the bubble.

5, Now the installation work is basically completed. Press the corners to ensure that the screen protector fits closely with the screen.

Press the corners of screen protector
Press the corners of screen protector

6, Finally, use the cleaning cloth and dust absorber to clean the surface of the new screen protector, now your phone has acquired a completely new outlook.

Tutorials 2: How to put on PERFECTSIGHT eye care screen protector perfectly with applicator?

https://youtu.be/ouP15A6YdZY


Step1 Check the protector is intact and then clean the phone screen
1. Check the protector is intact and then clean the phone screen.
2. Take out the alcohol pad and clean the screen.
3. Wipe dry the water stain with the microfiber wipe.

Step 2: Install the Alignment Frame
1. Make sure the small arrow is consistent with the orientation of the reciever.
2. Align the edge of the phone and put down the frame.

Step 3: Clean up the whole screen with the dust-absorber
Clean up the whole screen with the dust-absorber until there is no dust.

Step 4: Tear off the backboard and install

1. Press down the top of the backboard,separate the screen protector from it.
2. Make the screen protector be directed at the Alignment Frame.
3. Lay down the protector slightly and it will stick to the screen automatically.
4. Take off the Alignment Frame and swipe the screen with microfiber wipe.

Step 5: How to deal with the bubbles?
What if there are bubbles during installation?
1. Pull up the corner to the bubble

2. Slide the screen protector with fingers until it fit completely.


Step 6: How to deal with the dust?
What if there are dust during installation?
1. Use the dedusting tag to solve this problem.
2. Pull up the corner to the dust.
3. Insert the dedusting tag and absorb the dust between the screen and the protector.

Please note: check the dust is on the screen or on the protector after pulling up and insert the tag accordingly.Slide the screen protector with fingers until it fit completely.

How to put on a iPhone screen protector without alignment tool?

How to put on a screen protector for iPhone with alignment tray?

How to put screen protector on iPad?

If you’re confused hwo to put a screen protector on your big, beautiful iPad screen from scratches, crack or just cut down on the glare and protect eye, here’s a quick how to on applying a screen protector to your iPad.

Only needs to be done right, it’s a simple process, so take your time and follow the vedio step by step.

How to put a screen protector on iPad?

Eye care screen protectors for iPhone

View all
Summary
Review Date
Reviewed Item
How to put on a screen protector easily perfectly with pictures
Author Rating
51star1star1star1star1star